Termékek egyéb gyógyszerek (462)

Rinfor Grout Col is a special cementitious formulation, being fibre-reinforced with READYMESH technology, enriched with reactive microsilicates with very high pozzolanic activity and special crystalliser additives that increase the end result and the durability. Mixed with water, it is able to forge micro-concretes with pourable rheology. Once hardened, the product offers exceptional physical-mechanical and ductility values. Ideal for the reinforcement and seismic adaptation of flooring in reinforced concrete, brick-concrete or corrugated sheeting or wood, by constructing a thin extradoxal structural screed along with beams, pillars, structural crosspoints and walls, by means of suitable liners. The rheological and physical-mechanical characteristics of the Rinfor Grout Col product render it extraordinarily effective in reinforcing structural elements in reinforced concrete and masonry. Adhered to the inside of caissons, confined within cavities or spread out over the extrados of foundations and lofts, Rinfor Grout Col allows for low thickness structural reinforcing, substantially devoid of additional metallic reinforcement. Rinfor Grout Col belongs to the HPFRC (High Performance Fibre Reinforced Concrete) family, permitting the structural designer to make use of the following characteristics: - Exceptional resistance and traction as well as exceptional values of shear stress adhesion on various supports which have been suitably roughened; - advantages in structural calculations prescribed for fracture mechanics, resistance to traction and of the ultimate material deformation; - minimum thicknesses applied with reinforcing effects which have been distinctly improved as against interventions with traditional reinforced concrete; - highly notable reduction of mass and minimizing of additional loads applied for structural reinforcing as against interventions with traditional reinforced concrete (practically nil additional loads in the case of the thickness of the coating corresponding with the depth of sacrificed surface); - anti-carbonatation barrier (practically zero penetration of CO2) and anti-oxidant barrier; - auto-healing of any micro-fissures exposed to contact with fluids, thanks to the particular crystallising additives; - increment of durability of the structures repaired with Rinfor Grout Col, thanks to the migration effect of the crystallising additives; - very high resistance to fire; - eco-sustainability - made up of 100% mineral and metallic materials, totally recyclable at end of life. From the environmental point of view, the Rinfor Grout Col product is characterised by the following advantages: - Ecological packaging (card-cardboard) - product based on hydraulic binders, selected aggregates and mineral additives with content of organic raw materials < 1% - practically nil VOC emissions during installation; once hardened, nil VOC emissions. - containing a fraction > 5% of sub-products from the production industry 100% recyclable at end of life. For seismic adaptation with absorption and transfer of pressure or traction during events with elevated dynamic forces (seismic, impacts, deflagration); - for structural reinforcing and seismic upgrading through coating of beams, pillars structural ties, walls; - for reinforcing and seismic upgrading with external, low thickness, structural screed for lofts in reinforced concrete, concrete masonry, corrugated sheeting, wood;
 - for fabrication of light, thin section, structural elements
; - for the repair of flooring with need for resistance against elevated static and dynamic stresses, together with exceptional values of resilience and resistance to impacts; - for reinforcing and precision anchoring of heavy and highly stressed machinery: E.g. wind turbines, turbines, precision machinery, etc. The support must be in good condition, clean, sufficiently coarse, without crumbling parts or dust, pressure washed and saturated with water before application. With concrete, the abrasiveness of the support must be > 3mm; to obtain this level of coarseness, techniques of hydro-scarifying, bush-hammering, mechanical chiselling, sand blasting with large grain may be considered. With the case of surfaces in strongly absorbent brick-work (lofts in brick cement with surfacing of parts in brick) or in the case in which it is impossible to saturate the support with water, contact our technical services to evaluate suitable adhesion primers, such as Syntech Pavisheer or Syntech RGS. Above all, when used as a surface covering of lofts in concrete, or as a repair to industrial flooring, providing anchoring roots by drilling the support is particularly useful for increasing resistance to cuts and adhesion to the support (diameter 18-20 mm, depth 20 mm), and accurately cleaning the surfaces of the holes before spreading the Rinfor Grout Col.

Electromechanical automatic rebar cutting bench with 3 transfer roller tracks and a second additional rebar conveyor. Thanks to the second transfer track, parallel to the cutting unit, cutbars can be placed along the whole length of the roller track optimizing the use. This means that the same roller track can be used to store different orders. Basically, it is as if you had a much greater number of roller tracks allowing a better cutting optimization thus reducing the quantity of scraps. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

16.005 Tipologia:Punzone EHT Angolo:78° Altezza:260.00 mm Resistenza:Max 50 T/m Acciaio:1.2312 bonificato Lunghezze:SET-A-500 mm

17.003 Tipologia:Punzone Weinbrenner Altezza:175.00 mm Angolo:su richiesta Acciaio:1.2312 bonificato Lunghezze:L 2050 mm Frazionato

New battery strapping tool GT ONE ECO with adjustable operating mode according to the application: manual or soft for delicate products. The insertion of the strap is simple and fast and you simply have to press a button to get the tension and the vibration welding (heating by friction). The strapping tool is perfectly balanced, it can be used for vertical and horizontal strappings. It is equipped with a latest generation brushless motor driven by a lithium battery and with a digital display that shows all useful parameters (tension, welding time and battery charge level). Strap width:9-16 mm Strap thickness:0,4-0,85 mm Max. strap tension:1800 N Tensioning speed:14 mt/min Battery :14.4 V dc 3 A/h Li-ion Cycles for single charge:300 cycles Weight:3.7 Kg

ELECTRICAL EURO-HOLE CUTTING MACHINE FPE2-EURO E The punching FPE2 EURO-E is a silent machine, fast and safe with a sturdy steel frame and powerful electric motor that allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather, etc., with thickness up to 3 mm. The operation is very simple, once the product is inserted under the punch, the euro-hole can be made by an electric pedal, especially useful in soft material houses and therefore difficult to detect from the sensor, or via switch (product presence sensor) positioned on the head of the punching machine. The punch is an element subject to wear. Size:400x260x1100h mm Net weight:26,5 kg Package dimensions:420x280x1140h mm Power supply:230V/ 50Hz Power:370 W Fuses:2 x 3.15 A, 100mA Noisiness:less than 70 dB (A)

10.301 Tipologia:Punzone Amada-Promecam Angolo:88° Raggio:R0.60 Altezza:167.00 mm Resistenza:Max 30 T/m Acciaio:C45

32.151 Tipologia:Matrice LVD Angolo:78° Altezza:130.00 mm Resistenza:Max 40 T/m Acciaio:C45 Lunghezze:L 508 mm

Corpo per macchina di estrusione settore ceramico 1100 x 800 x 600 in Fe 510 saldata e lavorata

20.270 Tipologia:Matrice mono cava Amada-Promecam Angolo:80° Apertura:V160 Altezza:130.00 mm Resistenza:Max 100 T/m Acciaio:C45 Lunghezze:L 835 mm

72.900 Tipologia:Matrice mono cava Amada-Promecam Angolo:70° Apertura:V220 Altezza:170.00 mm Resistenza:Max 200 T/m Acciaio:1.2312 bonificato Lunghezze:L 505 mm

SUPREMA SUPER con comando SX Cod. ISO:12.23.06.009 Cod. Articolo:E72100

Nancy Misure:5.5/6.0 Acciaio, acciaio giapponese, acciaio cobalto. Le forbici Pinin nascono dalla forgiatura e dalla temperatura dell’acciaio con lo scopo di realizzare uno strumento che possa durare nel tempo.

Leaf blowers are indispensable tools for maintaining clean and tidy outdoor spaces, offering efficiency in clearing leaves and debris. These machines are designed to handle various tasks, from blowing leaves off lawns and driveways to cleaning gutters and patios. With powerful motors and adjustable speeds, leaf blowers ensure effective and precise cleaning, making them ideal for both residential and commercial use. The lightweight construction and ergonomic designs of leaf blowers provide comfort and ease of use, reducing fatigue during prolonged operation. These machines not only save time and effort but also contribute to the overall aesthetic appeal of your property by keeping it free of debris. Investing in a high-quality leaf blower is a smart choice for anyone looking to maintain a pristine outdoor environment.

The bl4500 tiller is a professional-grade tool designed for demanding gardening tasks. Powered by a Honda GCV160 engine, this tiller features a single-speed transmission for consistent performance. Its adjustable handlebars and protective steel casing ensure user comfort and safety. With a 60 cm tilling width, the BL4500 is ideal for preparing large garden plots, offering efficient soil cultivation. Weighing 49 kg, it combines power and maneuverability, making it a valuable asset for professional landscapers and gardeners.

Assi per mezzi da cava D.270x3500 in acciaio bonificato torniti finiti su tornio SAFOP con rugosità inferiore a 0.8

10.630 Tipologia:Punzone Amada-Promecam Angolo:88° Raggio:R0.80 Altezza:104.65 mm Resistenza:Max 100 T/m Acciaio:C45

I radiatori a raggi infrarossi onde medie INFRA RODON con elementi radianti in tubo di quarzo definiti anche lampade ad infrarossi sono caratterizzati da una elevata velocità nel raggiungere la temperatura di funzionamento e da un altrettanto rapido raffreddamento dopo lo spegnimento: questa particolarità può risultare molto utile ad esempio nel caso di linee di produzione con cicli di lavoro intermittenti dove siano necessarie frequenti fermate e partenze e si desideri limitare il periodo necessario per raggiungere la temperatura di regime.

15.115 Tipologia:Punzone Colly Angolo:90° Piano:P0.80 Altezza:120.00 mm Resistenza:Max 80 T/m Acciaio:C45

11.050 Tipologia:Elemento raggiato Raggio:R11.50 mm Altezza A:16.00 mm Acciaio:C45 Lunghezze:L 415 mm

31.110 Tipologia:Matrice Bystronic Angolo:85° Altezza:55.00 mm Resistenza:Max 100 T/m Acciaio:C45 Apertura:V32 Lunghezze:L 1000 mm

12.998 Tipologia:Porta Z Bystronic – RFA Altezza Punzone:121.00 mm Altezza Matrice:64.00 mm Resistenza:Max 100 T/m Acciaio:C45 Lunghezze:L 415 mm

12.997 Tipologia:Punzone Bystronic – RFA Angolo:85° Altezza:250.00 mm Resistenza:Max 50 T/m Acciaio:1.2312 Bonificato Raggio:R1.50 Lunghezze:L 500 mm

The strapping machine with side head is recommended in all sectors in which, with traditional machines, processing residues such as grease, liquids, etc., cause operating problems. The SP92-E is suitable for products with minimum dimensions of 10x50x100 mm; uses strap with a width of 12 mm and a maximum thickness of 0.65 mm. Equipped with worktop with adjustable height and device for automatic shutdown, after 60 sec. of inactivity. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:140 Kg

The range of incremental encoders fit to be coupled to motor shafts includes different mechanical types: the series RE400, with flange diameter 53.5 mm and RE470, with flange diameter 72 mm, provide a coupling joint, while the series RE410 and RE450 avail on a hollow shaft. Different measures are available for the joint hole and for the shaft diameter. All the types are housed in a metal case. The connection type and position can be chosen among different options, as well as the output signal formats. The pulses per revolution number ranges from 2 to 12500. The zero reference pulse option is available for all the series (type RE401/RE411/RE451/RE471) Output signals:NPN open collector, push-pull, 5 Vdc line driver Pulses per revolution range :2 to 12500 Supply Voltage:5/30 Vdc

Essenziali per mantenere costante la temperatura di processo ed ottimizzare il consumo energetico Infra Rodon, con lo scopo di offrire un servizio integrale alla clientela, realizza sistemi e quadri di termoregolazione e controllo completi specifici per ogni applicazione nel riscaldamento elettrico,. La fornitura della componentistica necessaria alla creazione di un anello di misura e controllo completo comprende principalmente: termoregolatori digitali a microprocessore ad azione di controllo PID specificamente progettati per il controllo di riscaldatori elettrici e radiatori infrarossi

Bidirectional automatic stirrup bender from bar, allows to produce stirrups and cuttosize bars using wires up to Ø 22 mm (#7). Driven by electric servomotors. Bar Wiser 22N stirrup benders are equipped with Max. pulling speed 120 m/min (400 ft/min) Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Processed wire type:Bar Single strand:1 Ø 8÷22 mm (#7) Double strand:2 Ø 8÷16 mm (#5) Pulling speed:120 m/min (400 ft/min) Bending speed:840°/sec Average power consumption:2 kWh

40.316 Tipologia:Matrice Wila-Trumpf Angolo:80° Altezza:100.00 mm Resistenza:Max 100 T/m Acciaio:C45 Lunghezze:L 100 mm

16.007 Tipologia:Lama EHT per 16.006 Altezza:68.00 mm Resistenza:Max 60 T/m Acciaio:1.2312 bonificato Lunghezze:L 500 mm

15.116 Tipologia:Punzone Colly Angolo:88° Piano:P0.80 Altezza:120.00 mm Resistenza:Max 80 T/m Acciaio:C45